DIN-slijtagetester

DIN abrasion tester determines abrasion resistance of rubber made products, natural rubber, vulcanized rubber, thermoplastic amorphous polymers to withstand the long term damage as a result of friction due to its excessive use. The ratio between standard loss of rubber material & test rubber material, expressed in percentage, marks the abrasion resistance index of sample under test.

Test arm weight: 2.5 N Additional Loads: 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N, Idler: 150 mm Abrasion stroke: 40 ± 0.2 M Horizontal displacement: 4.2 mm/ rotation Stroke: 20 m/ 40 m presetting Grips lateral displacement: 4.2 ± 0.04 mm/ rotation Idler wheel speed: 40 ± 1 rpm Measurement mode: Auto/ manual presetting Specimen size: Diameter 16 mm, thickness at least 6 mm Emery cloth specifications: 60 # seam is less than 2 mm Shift screw: 6 teeth/ inch Limit rotation: 85 rotate Set rotation: 84 rotation of 40 meters Return form: Electric automatic reset Net Weight: 75 kg Dimension: 950 x 660 x 310 mm Power supply: 220 V, 50 / 60Hz

DIN abrasion tester is used to determine the abrasion resistance of elastomers by the frictional loss of the rubber in products such as tires, conveyor belts, hoses, footwear, floor covering, thermoplastic amorphous polymers etc.

Temperature Control Range :Normal temperature to 200°C Temperature display resolution :0.01°C Temperature control accuracy :± 0.3° Calibration accuracy :Mooney value ± 0.5