STEAM STERILIZER

Vessel design life: Internal tank s30408, jacket Q245R life 10 years (20000 sterilization cycles) Design pressure of inner chamber: -0.1~0.3 MPa Jacket design pressure: 0.3 MPa Built-in steam generator (if any) : 0.3 MPa Design temperature: 150°C Maximum operating temperature: 138°C Maximum working pressure: 0.25 MPa Opening pressure of inner chamber safety valve: 0.28 MPa Opening pressure of jacketed safety valve: 0.28 MPa Inner chamber hydrostatic test pressure: 0.39 MPa Jacket test pressure: 0.52 MPa Temperature display accuracy: 0.1°C Pressure display accuracy: 0.1 KPa Sterilization temperature control accuracy: ±02°C Temperature uniformity: ±1°C Amplitude and times of vacuum pulsation: Amplitude -80~0 KPa, Frequency 1~99 Number of pulsations: Amplitude -80~80 KPa, Frequency 1 Times of positive pressure fluctuation: 1~3 Ultimate vacuum -97 KPa: -97 KPa Vacuum leakage rate: ≤0.13 KPa/min Surface temperature: The external surface temperature shall not exceed the ambient temperature by 20°C Dryness: The weight gain of fabrics after sterilization and drying shall not exceed 0.6%, and that of utensils, tools and instruments after drying shall not exceed 0.1%. Single-phase voltage supply: 220±10% V, 50 Hz Three-phase voltage supply: 380±10% V, 50 Hz Pure steam: 0.25 MPa ~0.35 MPa (Self-produced steam configuration none) Industrial steam: 0.3 MPa ~0.5 MPa (Self-produced steam configuration none) Water softening: 0.15 MPa ~0.3 MPa Purified water or water for injection: 0.15 MPa ~0.3 MPa (Only for self-produced steam configuration) Compressed air: 0.4 MPa ~0.7 MPa