Voeding, Drievoudige uitgang, DC

It is a high performance, fully solid-state, triple output DC power supply, particularly suitable for wide range of industrial and laboratory use involving experimental set-ups and circuit development applications. The two main outputs are continuosly variable from 0-32 V DC at a maximum of 3A, available through 2 sets of 4 mm colour coded termils, one towards the left and other towards the right of front panel. The variable output sections can be operated in constant voltage or constant current modes, with the unit automatically interchanging between the two modes, which are indicated by separate indicator LEDs. The front panle Voltage and Current control knobs provides for adjustment in output voltage and current respectively. The front panel also has separate 3 digit LED display for each varible section to montior output voltage or load current, selectable through meter (V/A) selection switch. The unit also provides a fixed 5V DC output with adjustment facility from 4.5 to 5.5 V with a maximum current of 3A along with overload indication. All the outputs are floating , i.e, neither the output positive termil nor the negative termil (nor any point within the circuitry) is connected to ground. Designed for continous use TECHNICAL SPECIFICATIONS Variable voltage Sections (2 identical sections) Output Voltage : 0-32V DC, continuously variable Output current : 0-3A maximum, continuously variable Constant Voltage Mode Operation Line Regulation : ±0.01% + 2mV for ± 10% line Load Regulation : ±0.01% + 2mV for ± 10% load change Ripple & Noise : 1mV rms maximum Constant Current Mode Operation Line Regulation : ±0.1% + 250uA for ± 10% line Load Regaulation : ±0.1% + 250uA for change in output voltage from 0 to maximum Ripple & Noise : 1mA maximum 5V section Output voltage : 4.5-5.5V DC with adjustment on front panel Output current : 3A maximum with overload indication Line Regulation : Less than 10mV Load Regaulation : Less than 10mV Ripple & Noise : 2mV rms maximum

MA